1. Maximum intake temperature: ≤ 80℃
2. Rated working pressure: 0.6-1.3Mpa
3. Environmental temperature: 5-45 ℃
4. Dew point of air: 2-10 ℃
5. Refrigerant: R-22
6. Pressure loss: ≤ 0.02MPa
7. Installation method: Indoor, no foundation, concrete floor leveling, reserved space for maintenance operations
8. Power supply: 220V-1PH-50HZ, 380V-3PH-50HZ
9. Users can selectively configure customized products, and consult our technical service department for detailed technical parameters

Design features:
1. The evaporator is a key component of the refrigerated dryer, with a large margin design, reduced system pressure, high heat transfer efficiency, and standard hydrophilic aluminum foil fins that are non greasy, corrosion-resistant, and durable
2. The compressor is a device that extracts refrigerant vapor from the evaporator and compresses it, with stable performance
3. The condenser is a heat exchange device where refrigerant vapor condenses and releases heat, which is carried away by circulating air or water. The air-cooled condenser uses hydrophilic aluminum foil, which is corrosion-resistant and not prone to dust accumulation. The water-cooled condenser uses high-efficiency spiral finned copper tubes for efficient heat exchange, ensuring safe operation of the equipment
4. The thermal expansion valve is the throttling mechanism of the refrigerated dryer, which converts high-pressure liquid into low-pressure liquid, creating conditions for the refrigerant to vaporize at low pressure and low temperature, effectively regulating the liquid supply to the evaporator
5. High voltage protection, low voltage protection, antifreeze switch, condensation temperature control switch, overcurrent protection, phase sequence protection, fault output
6. Adopting international brand electrical components to ensure precise and stable control system
7. Efficient separator and automatic electronic drain valve to ensure the separation and discharge of liquid water