Blast heating regenerative dryer
Blast heating regenerative dryer
Blast heating regenerative dryer
FOB
குறைந்த ஆர்டர் அளவு:
1
பொருளின் முறை:
空运, 陆运, 海运, 快递
எண்ணிக்கை (தேர்ச்சி):
1
மாதிரி:விலையில்லா ஆதரவுமாதிரிகளைப் பெறுங்கள்
பொருள் விவரங்கள்
செம்மொழிகள்
முக்கிய விவரங்கள்
எண்ணிக்கை (தேர்ச்சி):1
குறைந்த ஆர்டர் அளவு:1
விநியோக நேரம்:7-15Day
பொருளின் முறை:空运, 陆运, 海运, 快递
பேக்கேஜிங் விவரம்:Box packaging
பொருள் விளக்கம்

    The blast heating regeneration dryer uses a blower to extract ambient air, which is then heated by a heater to regenerate the adsorbent, avoiding gas loss during the heating stage of the micro heat regeneration dryer. It is suitable for situations with low regeneration gas consumption.

Standard technical parameters:
1. Rated intake temperature: ≤ 40℃ 
2. Rated working pressure: 0.6-1.0Mpa
3. Environmental temperature: ≤ 45℃ 
4. Dew point of air:- 40 ℃ (0.7MPa) (Customization accepted below -60 ℃)
5. Regeneration gas consumption: ≤ 3%
6. Pressure loss: ≤ 0.02MPa 
7. Inlet oil content: < 0.1mg/m³ 
8. Installation method: Indoor, no foundation, concrete floor leveling, reserved space for maintenance operations
9. Adsorbent: Activated alumina, molecular sieve
10. Inlet conditions for blower: 38 ℃ (RH=65%)
10. Power supply: 380V-3PH-50HZ
11. Users can selectively configure customized products, and consult our technical service department for detailed technical parameters

Design features:
1. Pure logic control, user-friendly human-machine interface, automatic continuous display of twin tower working conditions
2. Regenerative orifice plate technology effectively controls the regeneration flow rate
3. Accurate movements, stable performance, and easy operation
4. Professional rust prevention treatment is applied to the inner wall of the cylinder, which will not corrode for 10 years
5. Stainless steel diffuser is corrosion-resistant, wear-resistant, and durable
6. Stainless steel valves work reliably and have a lifespan of up to 500000 actions
7. Equipped with high temperature protection device, low-power density stainless steel electric heater, high temperature control accuracy, low risk, long service life
8. Use the adsorption tower heater as an insulation layer to reduce heat loss and energy consumption
9. Using well-known brand blowers, reliable performance and low energy consumption
10. Reasonable blower suspension design effectively reduces noise levels
11. Variable frequency band delayed adsorption technology is more energy-efficient (optional)






நிறுவனம்

குழு&நிபந்தனைகள்
எங்களுடன் பணியக்கூடுங்கள்

சேகரிப்புகள்

Featured Products

All products

பற்றி

செய்திகள்
ஷாப்

எங்களை பின்தொடருங்கள்

Phone
Mail