Blast heating regenerative dryer
2025.01.09
Product principle introduction:
The blast heating regeneration dryer uses a blower to extract ambient air, which is then heated by a heater to regenerate the adsorbent, avoiding gas loss during the heating stage of the micro heat regeneration dryer. It is suitable for situations with low regeneration gas consumption.
Standard technical parameters:
- Rated intake temperature: ≤ 40℃
- Rated working pressure: 0.6-1.0Mpa
- Environmental temperature: ≤ 45℃
- Dew point of air:- 40 ℃ (0.7MPa) (Customization accepted below -60 ℃)
- Regeneration gas consumption: ≤ 3%
- Pressure loss: ≤ 0.02MPa
- Inlet oil content: ＜ 0.1mg/m³
- Installation method: Indoor, no foundation, concrete floor leveling, reserved space for maintenance operations
- Adsorbent: Activated alumina, molecular sieve
- Inlet conditions for blower: 38 ℃ (RH=65%)
- Power supply: 380V-3PH-50HZ
- Users can selectively configure customized products, and consult our technical service department for detailed technical parameters
Design features:
- Pure logic control, user-friendly human-machine interface, automatic continuous display of twin tower working conditions
- Regenerative orifice plate technology effectively controls the regeneration flow rate
- Accurate movements, stable performance, and easy operation
- Professional rust prevention treatment is applied to the inner wall of the cylinder, which will not corrode for 10 years
- Stainless steel diffuser is corrosion-resistant, wear-resistant, and durable
- Stainless steel valves work reliably and have a lifespan of up to 500000 actions
- Equipped with high temperature protection device, low-power density stainless steel electric heater, high temperature control accuracy, low risk, long service life
- Use the adsorption tower heater as an insulation layer to reduce heat loss and energy consumption
- Using well-known brand blowers, reliable performance and low energy consumption
- Reasonable blower suspension design effectively reduces noise levels
- Variable frequency band delayed adsorption technology is more energy-efficient (optional)
产品参数/ Product parameter
鼓风加热再生式干燥机参数表 |
||||||||
型号 | 处理气量(Nm³/min) | 长（mm） | 宽（mm） | 高（mm） | 进出口尺寸 | 加热器功率（kw） | 鼓风机功率（kw） | 重量（kg） |
HKS-20MGF | 20 | 2000 | 1200 | 2600 | DN65 | 8 | 2.5 | 1400 |
HKS-25MGF | 25 | 2250 | 1200 | 2700 | DN80 | 12 | 3 | 1710 |
HKS-30MGF | 30 | 2350 | 1250 | 2700 | DN80 | 15 | 4 | 1950 |
HKS-35MGF | 35 | 2400 | 1250 | 2730 | DN80 | 18 | 4 | 2200 |
HKS-45MGF | 45 | 2485 | 1300 | 2750 | DN100 | 21 | 4.5 | 2430 |
HKS-55MGF | 55 | 2585 | 1300 | 2755 | DN100 | 24 | 5 | 2850 |
HKS-60MGF | 60 | 2700 | 1500 | 2850 | DN100 | 27 | 6 | 3000 |
HKS-70MGF | 70 | 2700 | 1500 | 2850 | DN125 | 30 | 6 | 3100 |
HKS-75MGF | 75 | 2900 | 1600 | 2900 | DN125 | 35 | 9 | 3300 |
HKS-80MGF | 80 | 2900 | 1600 | 3200 | DN125 | 40 | 11 | 3600 |
HKS-100MGF | 100 | 3100 | 1750 | 3200 | DN125 | 40KW | 11KW | 4100 |
HKS-120MGF | 120 | 3300 | 1800 | 3250 | DN150 | 52KW | 12.5KW | 4800 |
HKS-150MGF | 150 | 3500 | 2000 | 3400 | DN150 | 63KW | 12.5KW | 5750 |
HKS-200MGF | 200 | 3800 | 2200 | 3600 | DN200 | 85KW | 15KW | 7700 |
Contact
Leave your information and we will contact you.
Phone
Mail